Page 2 of 2

Re: Fire Station Two-Tone's

Posted: Fri Aug 14, 2020 6:09 pm
by scanfaned
Would anyone have the 2-Tones for Station 7 in Sun City/Menifee?

Thanks!

Re: Fire Station Two-Tone's

Posted: Fri Aug 14, 2020 8:56 pm
by Kingscup
Here is a list of all the station tones. To my knowledge, everything should be correct except for station 92.

https://web.archive.org/web/20170317155 ... out-codes/

Re: Fire Station Two-Tone's

Posted: Sat Aug 15, 2020 9:10 am
by scanfaned
Thank you, Kingscup!

Re: Fire Station Two-Tone's

Posted: Sat Aug 15, 2020 9:10 pm
by scanfaned
By chance would anyone know a bit more about the Riverside County Fire paging, in addition to the tone frequencies? I have been trying to program the tones into a Unication for a few stations, however have not been able to get the pager to activate. I am almost certain that it is the odd (shortened?) tone lengths. Would anyone know the A and B tone lengths or anything else that is unique about this paging system?

Thanks!

Re: Fire Station Two-Tone's

Posted: Wed May 03, 2023 10:17 am
by ke6upi
Hello,

Does anyone know the tones for Stn 95? I did look at the list. Stn 95 isn't on it.

Or does anyone know of any free software to decode the tones. I have the BCT15 (not the X) and the Fire Tone Out trick isn't working for me. (Tone A=0 Tone B=0)

Any help would be great.

Thanks,
David
KE6UPI

Re: Fire Station Two-Tone's

Posted: Mon May 08, 2023 9:42 am
by Kingscup
The tones for FS95 should be 688.3 and 767.4. 95 was built after the list came out. If you have an iPhone/iPad there is an app called Radio ID that can decode the tones. If I remember correctly, it costs a couple of bucks.

Re: Fire Station Two-Tone's

Posted: Sun Jun 23, 2024 2:37 pm
by Crazydave
ke6upi wrote: Wed May 03, 2023 10:17 am Hello,

Does anyone know the tones for Stn 95? I did look at the list. Stn 95 isn't on it.

Or does anyone know of any free software to decode the tones. I have the BCT15 (not the X) and the Fire Tone Out trick isn't working for me. (Tone A=0 Tone B=0)

Any help would be great.

Thanks,
David
KE6UPI
You can run the ProScan Software for free for 30 days.
This will let you log the tone-Out pairs. Turn the scanner on, plug it in.. and let it run for a few days.

It's really go software and I highly recommend it.

Here are the ones that I logged as station 95 by listening and watching the logs
95-Roripaugh.JPG
95-Roripaugh.JPG (67.99 KiB) Viewed 6363 times