Page 1 of 1
program a GRE psr300 trunking
Posted: Tue May 26, 2009 10:15 pm
by jbtech33
i need help with my Gre 300 trunking i did my uniden but i need help with the GRE
Re: program a GRE psr300 trunking
Posted: Wed May 27, 2009 10:02 pm
by brandon
Hi,
My first recommendation is to program the PSR-300 with software called Win97. In addition to the software you'll need a
programming cable. You can use
this Win97 file as a starting point.
If you want to do it manually by hand, here is a good tutorial that also applies to your model.
http://marksscanners.com/97/97.shtml#pr ... ng_systems
The biggest thing is make sure the EDACS systems are programmed in LCN order, and start on the second channel of the bank for GRE scanners (ex: Ch 101, Ch 201, Ch 301, etc..)
Re: program a GRE psr300 trunking
Posted: Wed May 27, 2009 10:15 pm
by jbtech33
Thanks I got it manualy now I need some help with some decimal IDs like the 1500s
Re: program a GRE psr300 trunking
Posted: Wed May 27, 2009 10:31 pm
by brandon
The 15xx decimal groups are used by county agencies such as the Animal Control and Code Enforcement.
1569 Animal Control - Riverside City
1570 Animal Control - West County
1571 Animal Control - East County
1572 Animal Control - Car-to-Car
1587 Code Enforcement - Countywide
1591 Code Enforcement - West
1593 Code Enforcement - South
This one I am about 95% sure based on stuff they talk about. They use 'NRM' callsign designators.
1588 Western Riverside County Regional Conservation Authority
If you mean 15-xxx AFS talkgroups, those are patches and must be programmed into GRE scanners since they don't automatically detect patched talkgroups. I asked GRE about addressing this and was told its something they're researching. Hopefully in the future we'll see a firmware update to resolve this.
Re: program a GRE psr300 trunking
Posted: Sat May 30, 2009 1:17 pm
by jbtech33
thanks Brandon you been a big help
Re: program a GRE psr300 trunking
Posted: Fri Nov 18, 2011 11:11 am
by marknel
*Please disregard, I didn't notice that you had removed City of Riverside forums.*
I realize this is an old topic, but I just got my hands on a PSR-300. Brandon, do you still have available the win97 file that was linked above?
Thank you in advance.
Mark Nelson
Re: program a GRE psr300 trunking
Posted: Tue May 15, 2012 3:27 pm
by cvrules90
brandon wrote:Hi,
If you want to do it manually by hand, here is a good tutorial that also applies to your model.
http://marksscanners.com/97/97.shtml#pr ... ng_systems
The biggest thing is make sure the EDACS systems are programmed in LCN order, and start on the second channel of the bank for GRE scanners (ex: Ch 101, Ch 201, Ch 301, etc..)
You also have to put every site as a separate system in every bank. Otherwise, the scanner won't know which control channel to lock on.